TOOL TROLLEY WITH TOOLS 388-PIECE

• robust steel tool trolley
• eight drawers with slides
• two fixed and two swiveling brake casters

Drawer 1:

• 1/4": 13 sockets, 9 long sockets, 23 bit sockets Phillips, Pozidriv, slotted, hex, Torx, 1 quick release ratchet, 3 extensions, 1 flexible extension, 1 screwdriver, 1 sliding T-type wrench, 1 universal joint
• 1/2": 15 sockets, 2 spark plug sockets, 1 quick-release ratchet, 2 extensions, 1 universal joint, 1 sliding t-handle
• 1/2" pneumatic: 12 impact sockets, 9 impact hex bit sockets, 1 impact extension, 1 universal joint, 2 impact adapters Torx: 5 1/4" sockets, 9 1/2" sockets, 2 adapters, 9 1/4" bits, 7 10 mm bits, 6 10 mm long bits

Drawer 2:

• 16 combination wrenches
• 8 flare nut wrenches
• 11 open end wrenches
• 8 45° offset ring wrenches

Drawer 3:

• 5 pin punches, 1 cape chisel, 1 punch, 2 taper punches, 3 chisels, 1 rubber mallet 400 g, 1 hammer 300 g, 1 long nose plier 150 mm, 1 diagonal cutter 150 mm, 1 water pump plier 250 mm, 7 socket wrenches

Drawer 4:

• 13 Torx L-keys
• 9 ball end hex keys
• 7 hex keys
• 6 electronics screwdrivers slotted, Phillips
• 15 screwdrivers slotted, Phillips, Torx

Drawer 5:

• 14 ratchet wrenches 6 - 19 mm, 1 1/4" socket adapter with quick release for 10 mm ratchet wrench, 1 3/8" socket adapter with quick release for 13 mm ratchet wrench, 1 1/2" socket adapter with quick release for 19 mm ratchet wrench, 1 1/4" bit adapter for 10 mm ratchet wrench, 1 crimping pliers, 25 cable ties, 500 wire connectors, 4 seal picks, 3 adapters, 1 pair of wire strippers, 1 voltage tester 6-24 V, 1 screwdriver for hose clamps 7x150 mm, 1 caliper, 1 marking pencil

Drawer 6:

• 2 locking pliers 165 - 175 mm, 2 adjustable spanners 200 - 250 mm, 1 sheet metal shear 250 mm, 6 needle files 90 mm, 4 files 200 mm, 1 utility knife, 1 snap-off knife, 1 pair of scissors, 1 mini hacksaw, 1 tape measure 5 m

Drawer 7:

• 17 cutting dies, 17 thread taps, 1 die stock, 1 tap wrench, 1 T-type tap wrench, 1 steel wire brush, 1 center punch, 1 screwdriver, 1 thread gauge
• 16 piece gear puller set - parts for 2 and 3 jaw pullers
• 2 internal circlip pliers 175 mm straight - bent, 2 external circlip pliers 175 mm straight - bent

Drawer 8:

• 1 1/2" torque wrench, 1 1/2" extension, 1 adapter 1/2" x 3/8", 1 magnetic hook, 1 riveter, 1 LED torch, 10-part screwdriver set, 3-part grease gun with tube and hose