The prices shown in the online store are specific to the ikh.se webshop and are valid only for orders placed through ikh.se. Availability information refers to the stock status in the ikh.se webshop. Prices on ikh.se may differ from retailer prices, as each retailer sets their prices independently. For store-specific availability and pricing, please enquire at your nearest IKH retailer. Find your nearest IKH retailer.
SUCTION HOSE 16MM ARMORVINPRESS PU
SKU:
NL70016
Available in store only
- PVC hose with embedded reduced pitch galvanised steel spiral
- internal layer in polyurethane (PU)
- for suction and delivery of liquids and air in pneumatic, hydraulic oli and chemical industry
- produced according to FDA 21 CFR 177.2600 e/f (watery foodstuffs, fatty foodstuffs) standard
- good flexibility
- operating temperature -20...+90 °C
- inner/outer diameter 16x23 mm
- bending radius 63 mm
- operating pressure 23 °C 14 bar
- explosion pressure 23 °C 42 bar
- explosion pressure 70 °C 18 bar
- weight 290 g/m
- thickness 3.5 mm
Use for e.g. (S: resistant / O: restricted resistance):
- ammonium chloride S
- boric acid S
- animal fats S
- glycols O
- hydraulic oils S
- air S
- lye, alkaline solutions S
- lactic acid S/O
- sea water S
- petroleum O
- sulphuric acid S
- soap solution S
- citric acid S
- nitric acid O
- urea (ADBLUE) S
- water S
- oil fuel S
Note! Check the more detailed chemical resistances from PU-table (attached PDF)
| Hose inner Ø (mm) | 16 |
|---|---|
| Hose inner Ø (mm) | SEK16.00 |
| Hose inner Ø (inch) | 5/8" |
| Package length (cm) | 100 |
| Package width (cm) | 2.2 |
| Package height (cm) | 2.2 |
| Gross weight (kg) | 0.290000 |
| EAN | 6418914900080 |
Related Products