FUEL TANK JERRY3 250L WITHOUT PUMP

• used with the machine’s own fuelling pump, e.g. with camlock connectors (not included), suction hose with foot valve and bulkhead with shut-off valve on the tank
• fixed suction hose with bottom valve to keep the fuel clean, no dirty suction hose in the fuel
• filling capacity 250 l
• suction hose with 3/4" shut-off valve, foot valve and filter
• length 900 mm
• width 630 mm
• height 750 mm
• weight when empty 25 kg
• lockable cover
• breathing valve to compensate volume changes by temperature
• filling connection DN100
• suction connection 3/4"
• material polyethen, LDPE
• does not require an ADR license
• product type-tested by VTT Technical Research Centre of Finland, UN/FIN/VTT10FIT
• UN 31 A type approval, fullfils every requirements for transporting diesel (UN/ADR/VAK)
• lifting from below with forklift

Finncont® expert opinion on the use of the TDG exemption section 1.1.3.1 C:

• Finncont® fuel tanks are UN/ADR type-approved and tested IBCs. The Finncont® fuel tank is suitable for authorized transport of diesel and fuel oil in all conditions. - a UN/ADR type-approved IBC packaging must be used when transporting fuel in connection with the fuel supply of machinery / equipment that perform contracting / billable work. In this case, the inspection and service life obligations apply. If you feel that you are covered by the exemption in section 1.1.3.1.C, eg. private use or do not perform billable work, there is no 2 1/2 year inspection obligation and the 7.5 year service life does not apply. - An unapproved tank has the same status in new condition as Finncont’s tank at the end of its 7.5-year service life. It is not possible to certify an unapproved tank for use in contracting / billing jobs.

ADR provision 1.1.3.1 C exemptions related to the nature of the transport operation:

• The carriage undertaken by enterprises which is ancillary to their main activity, such as deliveries to or returns from building or civil engineering sites, or in relation to surveying, repairs and maintenance. Maximum quantities of not more than 450 litres per packaging, including intermediate bulk containers (IBCs) and large packagings, and within the maximum quantities specified in 1.1.3.6. Measures shall be taken to prevent any leakage of contents in normal conditions of carriage. These exemptions do not apply to Class 7. Carriage undertaken by such enterprises for their supply or external or internal distribution does not fall within the scope of this exemption.